GULF SUPERFLEET SPECIAL QC
Go to PREVIOUS pageGo to BOTTOM of page

 

General Qualities & Characteristics

Gulf Superfleet Special QC 10W30 S is a semi-synthetic Super High Performance Diesel Engine Oil (SHPDO), for use in high output, high speed, turbocharged diesel engines. The oil meets the requirements of the major European Heavy Duty Diesel Engine makers for extended drain periods.
 
Performance Specifications
Gulf Superfleet Special QC 10W30 S exceeds the following performance specifications:, API CF-4, CE, CF, SG and SF, CCMC D5 and PD2, U.S. Military MIL-L-2104E, MIL-   L-46152C, ACEA E3-98 and B3-98, Mercedes228.3, VolvoVDS-2, Saab-Scania LD (Extended Drain), MAN QC 13-017(M 3275), Mack EO-L, Volkswagen VW 505.00.
 
Recommendations
Gulf Superfleet Special QC 10W30 S can be used with confidence in most high-speed diesel engines when working conditions are very severe and where superior lubricant’s performance is required. This multigrade motor oils offers benefits of reduced piston deposit, cylinder wear, oil consumption and oil thickening, as proven in various Original Equipment Manufacturer’s (OEM) engine tests. OEMs such as Mercedes Benz, MAN, Volvo, Iveco, Renault and Scania recommends Super High Performance Diesel Engine Oils for use at longer drain intervals than with conventional diesel lubricants. Gulf Superfleet Special QC 10W30 Sis suitable for use in many types of climate. For best results always follow Specific Equipment Manufacturer’s recommendations on lubricant quality and oil drain intervals.
 
Typical Properties
 

SAE Grade

10W30

Viscosity at 40 deg C, cSt

66.3

Viscosity at 100oC, cSt

10.4

Viscosity Index

146

Dynamic Viscosity at -15oC, cP

<3200

Pour Point, oC

-45

Flash Point, oC

249

TBN, mg KOH/gm

11

Sulfated Ash, wt%

1.11
 
Color Varies from Country to Country. Properties mentioned above are typical only and minor variations, which do not affect the product performances are to be expected in normal manufacturing. Advice and opinion noted herein are given in good faith and on the basis of the best information available, information is based on past history of the grade only and must not be construed as a guarantee of performance nor any legal liability is accepted by GULF OIL International or any of its affiliates. Follow equipment manufacturer’s recommendations for performance level and viscosity grade. The Material Safety Data Sheet for this product is available with your nearest GULF office or in this Website.(*) Computer generated read-across data.
Please click here for inquiries about this product.
 
vr:SP321-Issued 8/00