GULF MOULD OIL T
Go to PREVIOUS pageGo to BOTTOM of page

 

General Qualities & Characteristics

Gulf Mould Oil T is light-colored concrete mould oil for the construction of houses, buildings, subways and bridges. This mould oil is based on high-grade refined base oils and a suitable solvent, containing non-toxic surface-active compounds. Together with the bleeding water from the concrete, provide a low interfacial surface tension, which gives a smooth surface finish.
 
Application Requirements
  •           Gulf Mould Oil T is recommended for steel and coated wooden moulds
  •           Appliance in a thin layer, by spraying, swabbing or brushing
  •           Coated multiplex 1 liter at 30/40m²
  •           Steal and other metals 1 liter at 40/50m²
  •           Overspill must be removed, tends to give oil marks on the concrete when to much is used
Advantages
  •           Good removal from the moulds without damaging the concrete
  •           A good rust protection of the steel moulds at normal conditions
  •           Good release characteristics
  •           Good preventing against put-forming in the concrete surface
  •           No problems can be expected afterwards with, wallpaper, tiles etc.
  •           No discoloring of the concrete-surface
  •           Can be used where limited heated moulds are adapted.
 
Typical Properties
 

Density 15°C, kg/dm³

0.830

Viscosity at 40°C, cSt

3.58

Viscosity at 100°C, cSt

1.40

Flash Point, °C

59

Pour Point, °C

<-40

Total Acid Number, mgKOH/g

3.30
 
Color Varies from Country to Country. Properties mentioned above are typical only and minor variations, which do not affect the product performances are to be expected in normal manufacturing. Advice and opinion noted herein are given in good faith and on the basis of the best information available, information is based on past history of the grade only and must not be construed as a guarantee of performance nor any legal liability is accepted by GULF OIL International or any of its affiliates. Follow equipment manufacturer’s recommendations for performance level and viscosity grade. The Material Safety Data Sheet for this product is available with your nearest GULF office or in this Website.(*) Computer generated read-across data.
Please click here for inquiries about this product.
 
vr:SP277-Issued 8/00