Go to PREVIOUS pageGo to BOTTOM of page
 
Conveyors
There are many types of conveyors equipped with various belt, chain and gear drives. Frequently encountered are belt and roller types and the recommendations which follow may be used as a general guide:
 
Belt and Roller conveyors
 

Plain Bearings

    
Oil Lubricated Gulf Harmony AW 68  
Grease Lubricated Gulfcrown Grease No. 2  
 
Antifriction Bearings      
Oil lubricated Gulf Harmony AW 68  
Grease Lubricated - Normal temperatures Gulfcrown Grease No 2  
Grease Lubricated - Low temperatures Gulfcrown Grease No 0  
Grease Lubricated - High temperatures Gulf HT Grease  
Chains See Chains  
Gear drives & speed reducers Follow OEM recommendations  
 
Further guidance may be obtained by consulting E&R Sheets.
 
The data provided in this page is presented as a guide to Gulf Lubricant users. All information supplied is considered accurate but is furnished upon the express condition that the customer shall make its own assessment to determine the product's suitability for a particular purpose. No warranty is expressed or implied regarding such information, the data upon which the same is based or the results to be obtained from the use thereof; that any product shall be merchantable or fit for any particular purpose; or that the use of such other information or product will not infringe any patent.